上海天天彩选3开奖结果查询:HTP Electric Pipe Heating Cable
- Energy Efficient, Automatically Varies its?Power Output in Response to Pipe Temperature Changes;
- PTC Core Materials Are Made By Ourselves;
- The Continuous exposure capability is375°F (190°C), and?the?intermittent exposure capability is?450°F (232°C)
- Cut-to-length according to practical requirements on site;
- No Overheat or burnout Even when Wrapped Over Itself(Overlapped);
- Jiahong Provides Power Connection, Splice, Tee, End Seal Kits and other Related Accessories;
- Suitable for use in Non-hazardous, Hazardous and Corrosive Environments;
Jiahong’s Electric Pipe Heating Cable
Jiahong Electric Pipe Heating Cable?is an industrial grade?medium temperature?self-regulating heating cable. It?is designed to provide solutions for industrial pipe freeze protection and process temperature maintenance. Jiahong Electric Pipe Heating Cable?shall have continuous exposure (maintain) capability up to 375°F (190°C) and intermittent exposure capability up to 450°F (232°C). The voltage rating is 240 VAC. The cable is suitable for use on supply voltages of 208-277 VAC. Jiahong electric pipe heating cables are suitable for the whole of Europe and North America Markets. Jiahong electric pipe heating cable?is easy and simple to install. It only needs to be laid along the pipe.?Not any special skill and tools are required. Meanwhile, all necessary accessories such as termination, splicing, and power connection components are available in our factories as well.
Why Jiahong’s Electric Pipe Heating Cable
- No.1 上海天天彩选4开奖号码 in Asia-Pacific
- Over 25 Years of?Manufacturing Experience
- Support One Stop Sourcing
- Complete Test Reports For Europe And America
- Technical Support Team Assist Your Product Design
- 10 Years Warranty Services
- The only manufacturer that holds the Core Technologies in China
Electric Pipe Heating Cable
Jiahong Electric Pipe Heating Cable?is an industrial grade?medium temperature?self-regulating heating cable.
It?is designed to provide solutions for industrial pipe freeze protection and process temperature maintenance.
Jiahong Electric Pipe Heating Cable?is configured for use in both harsh, corrosive and hazardous (classified) locations, including areas where corrosives may be present.
It is widely applied to most industries such as chemical and pharmaceutical, food and beverage, marine, mining, oil and gas, and power, etc. ?
Jiahong electric pipe heating cable?shall have continuous exposure (maintain) capability up to 225°F (110°C) and intermittent exposure capability up to 392°F (200°C?or 250 psi steam).
The cable is suitable for use on supply voltages of both 110-120 VAC?and 208-277 VAC.
|Maxim um circuit length (in feet) per circuit breaker|
|?||Ambient temperature at start-up||120V||240V|
There are four popular models in the markets: 5 Watts per ft. (17w/m),?10?Watts per ft. (33w/m), 15?Watts per ft. (45 w/m), 20?Watts per ft. (66w/m).
Jiahong electric pipe heating cables are suitable for the whole of European?and North American?Markets. ?
Every Jiahong electric pipe heating cable has a?self-regulating characteristic.
It?can automatically adjust its heating power to provide thermal compensation to the heated pipe.
When the ambient temperature rises, the amount of heat and power decreases. However, when the ambient temperature drops, the amount of heat and power increases. This?self-regulating characteristic improves?safety and reliability.
The cable cannot?overheat or burnout, even when overlapped upon itself.
Jiahong electric pipe heating cable?can be cut-to-length at the site to match exact piping lengths without any complicated design considerations.
Because of this feature, this cable does not require an additional thermostat. ?
Jiahong electric pipe heating cable?is a?flat heating cable with?two parallel conductors.
It includes nickel-plated copper bus wires (16 AWG), semiconductive heating matrix and thermoplastic elastomer?dielectric insulation, tinned copper braid, and thermoplastic?over the jacket.
Inner bus wire adopts the same?materials as brands in Europe.
A semiconductive heating matrix is developed by ourselves, which has served our brands’ customers for over 15 years.
And Jiahong is one of the manufacturers who can individually develop and make these materials.
Tinned copper braid is ductile, yet withstands high mechanical loads, thus averting damage when installing in arduous environments.
The outer jacket is made of the PVC or other UV protection thermoplastic elastomer, which provides additional protection to cable and braid to against certain inorganic chemical solutions. ?
Jiahong electric pipe heating cable?is easy and simple to install. It only needs to be laid along the pipe.
Not any special skill and tools are required.
Meanwhile, all necessary accessories such as termination, splicing, and power connection components are available in our factories as well. ?
All Jiahong electric pipe heating cables?are approved by CE, ATEX, IECEX, and EAC.
Meanwhile, every?Jiahong electric pipe heating cable?comes with a 10-year warranty, which is the longest in the industry. ?
Jiahong electric pipe heating cable?is generally packed in wooden spools or plastic spools.
Normally we deliver in 250ft, 500ft and 1000ft a spool. Customers can cut the required length according to practical requests. OEM service is available.
You can also have your company information printed on the cable and customize your own package.
Our design department will be glad to help with labeling, installation manual, and box design.