上海天天彩选4开奖结果:HTU Automatic Electric Heat Cable

  • Continuous exposure (maintain) capability up to 375°F (190°C) and intermittent exposure capability up to 450°F (232°C);
  • Jiahong has the patent of PTC Core Materials;
  • Lower Installation Cost and Maintenance Expense Compared to Steam Heat Tracing;
  • No Overheat or burnout Even when Wrapped Over Itself (Overlapped);
  • Jiahong Provides Power Connection, Splice, Tee, End Seal Kits and other Related Accessories;
  • Suitable for use in Non-hazardous, Hazardous and Corrosive Environments;

Jiahong’s Automatic Electric Heat Cable

Jiahong Automatic Electric Heat Cable?is an industrial grade super high-temperature self-regulating heating cable.?Its power output self-regulates in response to the pipe temperature.?It?provides solutions for industrial pipe freeze protection and process temperature maintenance applications requiring high power output.?It is widely used in many industries such as chemical, pharmaceutical, food and beverage, marine, mining, oil, gas, and etc.

Jiahong Automatic Electric Heat Cable?has continuous exposure (maintain) capability of up to 375°F (190°C) and intermittent exposure capability of up to 450°F (232°C). The voltage rating is 240 VAC. The cable is suitable for use on supply voltages of 208-277 VAC. This is a super high self-regulating heating cable that is unique. With over 25 years of experience in developing and manufacturing, Jiahong is the only manufacturer in China who can make this super temperature self-regulating heating cable. All Jiahong Automatic Electric Heat Cables?are approved by CE, ATEX, IECEX, and EAC. The Cables are popular in Europe.

Why Jiahong’s Automatic Electric Heat Cable

  • Top 1 Heating Cable Exporter in Asia-Pacific
  • Over 25 of Years Manufacturing Experience
  • Complete Test Reports For Europe And America
  • Technical Support Team to Assist Your Product Design
  • 10 Years Warranty Services

Automatic Electric Heat Cable

Jiahong Automatic Electric Heat Cable?is an industrial grade super high-temperature self-regulating heating cable.

It provides solutions for industrial pipe freeze protection and process temperature maintenance applications requiring high power output.

The cable is configured for use in both non-hazardous and hazardous (classified) locations, including areas where corrosives may be present.

Hazardous Industrial heating cable 190℃ Power output curve

It is widely applied to most industries such as chemical, pharmaceutical, food and beverage, marine, mining, oil, and gas, etc.

Jiahong Automatic Electric Heat Cable?has continuous exposure (maintain) capability of up to 375°F (190°C) and intermittent exposure capability of up to 450°F (232°C).

The voltage rating is 240 VAC. The cable is suitable for use on supply voltages of 208-277 VAC. This is a super high self-regulating heating cable which is unique.

Maximum circuit length (in feet) per circuit breaker
Ambient temperature at start-up120V240V
15A20A30A15A20A30A
15HTU50℉10℃5573102110146165
0℉–20℃506710099131165
–50℉–45℃46619188117165
30HTU50℉10℃3749557398110
0℉–20℃3243557393110
–50℉–45℃2737556991110
45HTU50℉10℃493241496482
0℉–20℃212741435682
–50℉–45℃182437374973
60HTU50℉10℃552737354670
0℉–20℃172134334467
–50℉–45℃152030324364

 

Every Jiahong Automatic Electric Heat Cable?has a?self-regulating characteristic.

Its power output self-regulates in response to the pipe temperature. When the ambient temperature rises, the amount of heat and power decreases. However, when the ambient temperature drops, the amount of heat and power increases. This?improves?its safety and reliability.

 

Self Regulating Heating Cables' Working Principle

Graphic: Self Regulating Heating Cables’ Working Principle

The cable cannot?overheat or burnout, even when overlapped upon itself.

HTU can be cut-to-length on site to match exact piping lengths without any complicated design considerations. Because of this feature, this cable does not require an additional thermostat.

Jiahong Automatic Electric Heat Cable?is a parallel circuit electric heater strip.

It has a strong and stable structure. It includes nickel-plated copper bus wires (16 AWG), semiconductive heating matrix, fluoropolymer dielectric insulation, tinned copper braid and fluoropolymer over the jacket.

Inner bus wire adopts the same?materials as brands in Europe.

We develop a semiconductive heating matrix, which has served our brand customers for over 15 years.

Jiahong is one of the top manufacturers who can individually develop and make these materials.

Tinned copper braid is ductile, yet it withstands high mechanical loads, thus averting damage when installing in arduous environments.

The outer jacket is made of the fluoropolymer, which provides additional protection to cable and braid where there is possible exposure to chemicals or corrosives.

Jiahong Automatic Electric Heat Cable?is easy and simple to install.

There is no need for special skills or tools. Besides, all the necessary accessories such as termination, splicing, and power connection components are provided in our convenient kits as well.

Jiahong Automatic Electric Heat Cable?is generally packed in wooden spools or plastic spools.

Normally we deliver in 250ft, 500ft and 1000ft a spool.

Customers can cut the required length according to practical requests. You can also have your company information printed on cable and customize your own package.

Our design department will be glad to help you.

Jiahong Automatic Electric Heat Cable?is approved by CE, ATEX, IECEX, and EAC.

All SR heating cables come with a 10-year warranty, which is the longest in the industry.

To improve Jiahong Automatic Electric Heat Cable, our technology team continuously cooperates with experienced experts and brands’ such as Raychem.

At the moment, we’re still the only supplier who owns the complete certificates and the most product patents.

We believe that more and more heating trace goes to self-regulating cable, it’s an overwhelming trend.